Table of Contents
Advertisement
Pairing will be confirmed when you hear a tone and the Bluetooth
icon appears on the handset.
Refer to the user's manual of your Bluetooth enabled mobile phone to
learn how to search for or add new Bluetooth devices.
Notes:
Paired device(s) will be connected automatically and stored into the
Paired Devices list.
>When a device is successfully connected, corresponding device
icon will be displayed on screen and Bluetooth device LED on
base will be on.
>If you would like to pair up another Bluetooth device, please
repeat the steps as above.
7.2.2
Replace a paired device
If you have already paired up two Bluetooth devices, you will need to
replace one of them if you would like to pair up another device. Follow
the below steps to replace and pair up a new device.
OK
Press
and then / to select "MOBILE SETUP".
OK
Press
and the display will show the already paired devices
and then you are requested to select the device to be replaced.
Press / to select the desired device.
OK
Press
to confirm. Display will show "REPLACE?".
OK
Press
to confirm, and the device will be removed from paired
list.
You will be requested to pair up the new Bluetooth device. Refer to
Section 7.2.1 to proceed with the next steps.
Note:
When pairing a new mobile, the connected mobile has to be disabled
temporarily.
7.2.3
Paired Devices
The mobile(s) paired up will be displayed in the paired devices list, no
matter it (they) is (are) connected or not. You can choose to connect,
or remove the mobile from this menu.
OK
Press
and then / to select "PAIRED UNITS".
13
Advertisement
Table of Contents
