Table of Contents
Advertisement
26
display, and the alarm tone rings for 45 seconds. You can press any key
to disable the alarm.
If the snooze function is activated, the alarm will sound again at the
end of the snooze period of seven minutes. You can also press and
hold
while the alarm is sounding, to stop the alarm and turn off the
snooze function.
Note:
A key press will still disable the alarm even if the handset keypad is
locked when the alarm rings.
The alarm volume level is the same as the settings of the handset
ringer volume. If the handset ringer is set to "VOLUME OFF", the
alarm still sounds at "VOLUME 1" level.
During an external call or internal call, if an alarm is set and when
the alarm time is reached, the
An alarm tone will be emitted from the earpiece to alert the user the
alarm time Once the user presses any key or presses and holds.
disable the alarm, the display will revert to the call duration.
During paging or ringing, the alarm will not sound when the alarm
time isreached. However, if the snooze function is enabled and there
is no paging or ringing, the alarm will sound again at the end of the
snooze period.
10.2.1
Turn on/off the alarm
OK
Press
and / to select "HS SETTINGS".
OK
Press
and / to select "ALARM".
OK
Press
and / to select "ON/OFF".
OK
Press
to confirm.
Note:
If ON is selected, you will be asked to set the alarm time.
10.2.2
Set the alarm time (if alarm time is set to be ON)
Follow Steps 1 to 4 in Section 10.2.1.
Enter the alarm time in 24 hour format.
OK
Press
to display "SNOOZE".
OK
Press
and / to select snooze "ON" or "OFF".
OK
Press
to confirm.
and "ALARM ON" will still flash.
to
Advertisement
Table of Contents
