ritetemp 6036 Operation Manual
Hide thumbs Also See for 6036:

Advertisement

Operation 6036
P M
ENGLISH

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 6036 and is the answer not in the manual?

Questions and answers

Svan Skulason
April 2, 2025

how tochange batteries ??

1 comments:
Mr. Anderson
April 2, 2025

To change the batteries in the RiteTemp 6036:

1. Switch the MODE switch to OFF and the FAN switch to AUTO.
2. Remove the thermostat from the wall if needed.
3. Open the battery compartment and remove the old batteries.
4. Install 2 new AA alkaline batteries, matching the polarity as marked.
5. Replace the thermostat on the wall if removed.
6. Press the RESET button (under the right cover) after installing the batteries.

Note: Replace batteries within 30 seconds to keep custom settings. Only the Energy-Star program remains if settings are lost.

This answer is automatically generated

Subscribe to Our Youtube Channel

Summary of Contents for ritetemp 6036

  • Page 1 Operation 6036 ENGLISH...
  • Page 2: Home Screen

    When you are comfortable with touch inputs, proceed. Statement of use: The 6036 can be used with millivolt, 24VAC, single and 2 stage conventional systems, gas/oil/electric heat, 1 stage heat pumps, 2 stage heat pumps, zoned hot water (2 or 3 wire), zoned forced air, single and 2 stage cooling and hybrid systems.
  • Page 3: Menu Screen

    MENU screen Set Time Return HOME Touch this area to set Displayed when the the time of day. Left arrow goes back, MENU button is pressed. Set o C - o F right arrow goes forward. Touch this to Set Day set temperature Touch this area to set display.
  • Page 4: Auto-Run

    The Mode Switch must be in HEAT or COOL mode to configure. Configure Press MENU to configure the thermostat (from HOME screen). Set day of the week - Touch the Day of the week area to cycle through the days of the week to select the current day. Set time of day - Touch the Time of Day arrows to move the time selection forward or backward until it displays the...
  • Page 5: Program

    Program NOTE: 60 Second Rule-During programming, if a button is not pushed in 60 seconds, the unit will return to the home screen. Everything you have changed while programming will automatically be saved. Select HEAT with the HEAT/Cool MODE switch. Press PROGRAM to go to the programming screen.
  • Page 6 MANUAL override screen Manual Return HOME HOLD The 6036 has 3 manual Touch this area to set override commands. a comfortable target These are accessed by temp for the system touching the Current to hold until you return Temp Display at the and remove HOLD.
  • Page 7 At the HOME screen touch the time to toggle from 12 to 24 hr display. Filter Timer The 6036 has a feature that keeps track of actual furnace run time and reminds you to periodically replace your system's air filter.
  • Page 8 Auxiliary heat is more expensive than the heat pump. 6036 Features This thermostat can be used with all millivolt and 24VAC heating and cooling systems. It cannot be used with line voltage systems. This thermostat is digital and your desired heat or cool temperatures can be easily be set on the large touch screen with the UP/DOWN arrows.

Table of Contents

Save PDF