Page 1
Operation Guide 6025 Statement of use: The 6025 can be used with - millivolt, 24V single and 2-stage conventional systems, gas/oil/electric heat, 1-stage heat pumps, 2 -stage heat pumps, zoned hot water (2 or 3 wire), zoned forced air, single and 2- stage cooling, and hybrid systems.
Set Clock Set day of the week - • Press SET CLOCK once SET CLOCK TIME SET PROG2 TARGET TEMP to set the day of the week. The day of the week display TIME SLOT flashes. (Initially SU for Sunday) HEAT TIME TIME...
NOTE: 60 Second Rule-During programming, if a button is not Program pushed within 60 seconds, the unit will go out of the set mode. Everything you have input in this programming will automatically be saved. • Select HEAT with the HEAT/Cool MODE switch. •...
• Press HOME to leave program REVIEW mode and run the program. Special Features - Swing setting determines the temperature difference from ON to OFF that the SWING 6025 will command the HVAC system to run. TIME • With the MODE switch in HEAT or COOL, press the button.
• HOLD is canceled if the MODE switch is moved, or press HOLD again. Lock Allows you to lock the 6025 (to prevent any changes in custom settings) • To enable or disable the program lock, press the following buttons one at a time,in this sequence.
The life of a HVAC filter varies depending on many factors, furnace run time, and this will vary from the filter life noted on the filter media. The 6025 has a feature that keeps track of actual furnace run time and reminds you to periodically replace your system's air filter.
Page 7
C or F display Celsius / Fahrenheit selection. The C/F jumper is on the top left of the 6025: With the jumper OFF 6025 displays Fahrenheit. When changed, the thermostat must be reset to activate the change. When resetting, all custom settings and programming will be erased and only the Energy-Star program will remain.
Page 8
6025 Features This thermostat can be used with all millivolt and 24VAC heating and cooling systems. It cannot be used with line voltage systems. This thermostat is digital and your desired heat or cool temperatures can easily be set on the large screen with the +/- dial.
Page 9
Covers removed C B O W W Y Y RH RC G A SET CLOCK TIME SET PROG2 TARGET TEMP TIME SLOT HEAT PROGRAM COPY HOLD REVIEW FILTER Customer Support: 877-505-2353 or Visit our website www.ritetemp-thermostats.com 1611-023...