ritetemp 6008 Operation Manual

Operation 6008
Fan
Switch
1
PG
Set Temp
Turn the Temperature dial to select the desired temperature.
Warmer - counter clockwise (red)
Cooler - clockwise (blue)
Operate
Your thermostat is now in operation.
In the winter, set the system switch to HEAT to control
your heating system.
In the summer, set the system switch to COOL to
control your air conditioner.
In spring and fall or when windows are open, you can
set the system switch OFF.
Setting the FAN switch to AUTO automatically runs your
system's fan during heating and cooling.
Setting the FAN switch to ON runs your system's fan
continuously even without heating or cooling.
NOTE: LED blinks when batteries are low.
Caution: System will stop when batteries die.
Once you have installed the thermostat,
follow the instructions below to operate your
new thermostat.
Configure
Set HEAT/COOL mode switch to HEAT or
COOL. Set the Fan switch to automatic.
Temperature
Statement of use: The GPMG8099 can be used with most
Dial
24 volt gas, oil or electric heating systems, or gas millivolt
heating systems. It cannot be used with 120 volt heating
systems or heat pumps.
HEAT/COOL
Mode Switch
Customer Support: 888-515-2585
Low Battery
Visit our webiste www.ritetemp.info
indicator
WARMER
COOLER