Rack Installation - TP-Link TL-ER5120 Installation Manual

Figure 2-1

Rack Installation

■
To install the device in an EIA standard-sized, 19-inch rack, follow the instructions
described below:
1. Check the grounding and stability of the rack.
2. Secure the supplied rack-mounting brackets to each side of the device with supplied
screws, as illustrated in the following figure.
Figure 2-2
3. After the brackets are attached to the device, use suitable screws (not provided1 to
secure the brackets to the rack, as illustrated in the following figure.
Caution:
Please set 5~10cm gaps around the device for air circulation.
■
Please avoid any heavy thing placed on the device.
■
Please mount devices in sequence from the bottom to top of the rack and ensure a
■
certain clearance between devices for the purpose of heat dissipation.
Gigabit Load Balance Broadband Router
Desktop Installation
Bracket Installation
Figure 2-3 Rack Installation
Feet
Bottom of the
Device
Notch
Rack-
mounting
Bracket
Screw
Rack
Installation 06