Chapter 4 Connection; Wan Port; Lan Port; Console Port - TP-Link TL-ER5120 Installation Manual

ChaCter 2 Connection
21C

WAN Port

Please connect the WAN port of the router to the interface provided by ISP via Ethernet
cable.
211

LAN Port

Connect a LAN port of the router to the computer by RJ45 cable as the following figure
shown.
Note: If the router is connecting with Server/Switch or other Ethernet devices, please
make sure the RJ45 cable is less than 100m.
212

Console Port

CLI (Command Line Interface1 enables you to do some simple operations to the router,
thus you can load the CLI after connecting the PCs or Terminals to the console port on
the router via the provided cable.
Connect the console port of the device with your computer by the console cable as the
following figure shown.
RJ45 Port
Figure 4-1
Gigabit Load Balance Broadband Router
LAN Port
RJ45 Cable
Connecting the LAN Port
Connection 12