Ip Setting - LevelOne WAP-0004 User Manual

3.3 IP Setting

This page allows user to configure the IP and DHCP settings of the Access
Point.
The default IP address of this access point is 192.168.1.1 with the subnet mask
of 255.255.255.0. User can type in other values for IP Address, Subnet Mask
and Gateway and click "Apply" button for the changes to be effective.
User can also set the Access Point to obtain the IP from a DHCP server, but it
is not recommended. Select the option "Obtain IP Automatically" and click
"Apply" button for the changes to be effective.
DHCP Server: It is not recommended to enable the DHCP Server if user has a
DHCP server running in LAN network because it probably will cause possible
the conflict of IP assignment. Enable the DHCP server function by selecting
the option "On", and enter the IP range. IP range : When user set the IP range
that Client can get the IP in the range.
16