the page.
Update: Select one of the entries in the static IP address table at the bottom of
the page and, after changing parameters, click "Update" to confirm the changes.
Delete: Select one of the entries in the static IP address table at the bottom of
the page and click "Delete" to remove the entry.
New: Click "New" to clear the text boxes and add required information to create
a new entry.
7.4.2
Dynamic
This screen leads to set NAT parameters.
NAT: Click the radio buttons to enable or disable NAT.
Transmit: Click the radio buttons to set the desired transmit parameters,
disabled, RIP 1, or RIP 2.
Receive: Click the radio buttons to set the desired transmit parameters,
disabled, RIP 1, or RIP 2
59