Getting Start With Wireless Router; Know The 802.11G Wireless Router; Connect To The 802.11G Wireless Router; Access The Setting Menu - LevelOne WAP-0004 User Manual

box, where get to select the firmware file, which download from the web for the
latest version. Upon selecting the firmware file, click "Upgrade" and complete
the firmware upgrade process when the Access Point re-operates after it
restarts.

6. Getting Start with Wireless Router

6.1 Know the 802.11g Wireless Router

Ports:
● Power Receptor
● Reset Button
● RJ-45 Ethernet Port
Cross-over cable is required to connect to computer directly
● There is no visual LAN port for Pocket AP.
LEDs:
● Power LED: ON when the unit is powered up
● LAN LED: ON indicates LAN connection; BLINK indicates LAN activity
● WLAN LED: ON indicates WLAN is working; BLINK indicates wireless
activity.

6.2 Connect to the 802.11g Wireless Router

Before installation, please set the TCP/IP of your operating computer to
"obtain IP address automatically".
6.2.1

Access the Setting Menu

User could start to access the configuration menu anytime by opening a web
browser window by typing the IP address of this wireless router. The default IP
is 192.168.1.1.
Note: to configure the settings must through the wireless connection, instead of
RJ45 cable.
35