Basic Setting - LevelOne WAP-0004 User Manual

5.2

Basic Setting

This is the page allow to change the settings of access point.
AP Name: The name of the AP, which can be used to identify the Access Point
among the all the Access Points in the wireless network.
SSID: Service Set Identifier, which is a unique name shared among all clients
and nodes in a wireless network. The SSID must be identical for each clients
and nodes in the wireless network.
Channel: The channel that AP will operate in. User can select the channel
range of 1 to 11 for North America (FCC) domain, 1 to 13 for European (ETSI)
domain and 1 to 14 for Japanese domain.
Wireless Mode: There are two modes for this option, one is infrastructure, and
the other is Ad-hoc.
Authentication Type: The authentication type default is set to open system.
There are three options: open system; shared key; and WPA-PSK. User may
want to set to Shared Key when the clients and AP in the same wireless network
enable the WEP encryption. All the nodes and hosts on the network must use
the same authentication type.
29