LevelOne WAP-0004 User Manual page 26

Step 4: Set WEP Encryption
If user wants to enable WEP, please click "Enabled". Then, select the key size
of WEP encryption and enter the key value in the key text box. Click "Next" to
continue.
Step 5: Restart
The Setup wizard is now completed. The new settings will be effective after the
Access Point restarted. Please click "Restart" to reboot the Access Point. If
user does not want to make any changes, please click "exit" to quit without any
changes. User also can go back to modify the setting by clicking "Back".
26