LevelOne WAP-0004 User Manual page 50

Shared Key requires the user to set a WEP key to exchange data with other
wireless clients that have the same WEP key. This router also supports
WPA-PSK.
Authentication Type: The authentication type default is set to open system.
There are three options: Open System; Shared Key and WPA-PSK..
WEP: Enable or Disabled. This is to make WEP enabled or disabled.
Mode: Select the key mode in ASCII or HEX
WEP Key: Select the level of encryption from the drop-down list. The router
supports, 64- and 128-bit encryption.
Key 1 ~ Key 4: Create an encryption scheme for Wireless LAN transmissions.
Manually enter a set of values for each key. Select which key user wants to use
by clicking the radio button next to the key. Click "Clear" to erase key values.
Click "Apply" button for the changes to be effective.
50