Getting Started (Controls); Quick Tour Of The Controls - Hitachi VT-FX616A Owner's Manual

You need to select the appropriate channel.
n Turn the power on to both the TV and the VCR, and look for a switch on the back of the VCR.
Set the switch to 3 or 4, whichever is not a commercial channel in your area.
Your basic hookup is now complete. When you're ready to try hooking up a second VCR or a
video camera for a complete home entertainment system, see Advanced Operations.
Now turn the TV and VCR back around facing you and begin your quick tour of the controls
(page 15).

Getting Started (Controls)

n n n n

Quick Tour of the Controls

Study these pictures carefully to learn about the buttons and controls that you'll need for
everyday operation. Various controls are explained throughout this manual as they are needed,
but now is a good time to get familiar with their locations.
Most of the time, you'll be directing the VCR from the remote control, but there are some
controls on the VCR that will come in handy too.
When you're familiar with these basic controls, proceed to Initial Setup (page 20). We'll show
you how to program your local channels and set the clock to make your VCR fully functional.
How the Remote Control Works
Pressing a button on the remote control transmits an invisible beam of light (infrared) to a
receiver at the right front of the VCR.
When using the remote, aim the front end toward the VCR and make sure nothing – such as a
coffee table or your dog – is blocking the path of the infrared beam.
12