Getting Started (Controls); Quick Tour Of The Controls - Hitachi VT-M272A Owner's Manual

Getting Started (Controls)

Getting Started (Controls)

• Quick Tour of the Controls

Study these pictures carefully to learn about the buttons and controls that you'll need for
daily operation. Various controls are explained throughout this manual as they are
needed, but now is a good time to get familiar with their locations.
Most of the time, you'll be directing the VCR from the remote control, but there are some
controls on the VCR that will come in handy, too.
When you're familiar with these basic controls, proceed to Initial Setup (page 19). We'll
show you how to program your local channels and set the clock to make your VCR fully
functional.
Pressing a button the remote control transmits an invisible beam of light (Infrared) to a
receiver at the right front of the VCR.
When using the remote, aim the front end towards the VCR and make sure nothing -
such as a coffee table or your dog - is blocking the path of the infrared beam.
20
How the Remote Control Works