Basic Operations (Vcr Plus + Recording); Easy Delayed Recording With The Vcr Plus + System - Hitachi VT-FX616A Owner's Manual

programming and delete those shows that are not essential.

Basic Operations (VCR Plus + Recording)

n n n n Easy Delayed Recording with the VCR Plus + System
About the VCR Plus+ System
This handy feature makes timed recordings a snap. You don't need to enter the specific channel,
date, time, or duration of a program. All you enter is its PlusCode programming number – a
number of up to eight digits. This special code is easy to find in your favorite TV program guide
or daily newspaper. Here's a sample page from TV Guide showing PlusCodes next to each
program.
® ®
VCR Plus+ and PlusCode are trademarks of Gemstar Development Corp.
Before You Begin
If you are receiving all channels through a cable box, set up for the cable box before
programming timed recordings.
Cable with a Cable Box or Cable with a Cable Box and Splitter Setup
Use this setup procedure if you receive all channels through a cable box. CABLE BOX SET tells
the VCR how to record or to view programs from the cable box. If your cable box can be
controlled by a remote, the VCR may be able to tune it to the channel you want to record or to
view. Before you begin, you need to know the output channel number for your cable box.
Usually this is either 03 or 04, but it could be 02 through 13. Consult your cable company if
you're not sure.
1. Connect the Cable Box, VCR and TV. See page 69.
2. Press MENU, then press 5 to select "INITIAL SETUP MENU".
3. Press 1 to select CATV2 with the ANT/CATV1/CATV2 setting, then press 5 to select
"CABLE BOX SET" menu.
4. Press 2 to answer "YES" to the question "Is a cable box being used with the VCR for all
channels?" You will then see this screen:
33