Basic Operations (Index Plus+); Index Plus+ System - Hitachi VT-FX616A Owner's Manual

5. Press number buttons 1, 2, or 3 to select ONE TIME, DAILY, or WEEKLY RECORDING.
Important: Programming does not take effect unless you select one of these options.
6. When the next screen comes up, choose between standard or extended tape speed by pressing
the 5 button. This is also a good time to check the channel number – it should be the one on
which you usually watch the program at home. (If not, you need to check your VCR Plus+
channel setup.)
7. Review the screen to be sure everything is set as you want, then press MENU to complete
your programming or continue with additional programs.
When you have set up all the timed recordings you want:
n Don't forget to load a videocassette (with the safety tab still attached) to record on.
n If using a cable box the VCR can control, turn on the cable box before the time the recording
is to begin.
n If using a cable box the VCR cannot control, turn on the cable box and tune it to the channel
you want to record before the time the recording is to begin.
Important: Your timed recording settings take effect when you turn off the power on the VCR.
Caution on VCR Plus+ Recording
After entering a VCR Plus+ number, check the information displayed with the "PROGRAM REVIEW",
if there is (are) any unnecessary program(s), please cancel or correct it (them).

Basic Operations (Index Plus+)

n n n n

Index Plus+ System

This VCR can display information on the TV programs broadcast by TV stations and data on the
recorded programs (titles, channels, recording lengths (times), etc.) on the TV screen. You can
obtain various types of information on TV programs from these displays and also use them for
recording, playback and tape management. The Index Plus+ system makes it possible to utilize
these functions.
n Before using the Index Plus+ system, perform the procedure to pre-load program data. (See
36