Hitachi VT-FX616A Owner's Manual page 14

Hitachi owner's manual vcr vt-fx616a
Table of Contents

Advertisement

JOG DIAL Moves the tape forward and reverse one frame at a time.
LAST CHANNEL Switches to the TV channel you watched previously during the current
viewing session.
F.FWD Fast forwards the videotape.
STOP Stops a videocassette from playing, recording, pausing, rewinding – or anything it is
doing.
i Used to display program related information on the TV screen.
TITLE When pressed once, the program title and station name of the received channel are
displayed. When pressed again, data on programs which the received channel plans to broadcast
(program guide) is displayed.
0 to 9 Number buttons used in on-screen programming. Can also be used to change channels.
(Simply press 2 or 3 digits for the channel you want – such as 0 and 6 for channel 6, or 100/ENT
and 2 and 4 for channel 124.)
AVX Used for recording from an auxillary input such as a stereo system.
INDEX Used to display the Index Plus+ directory.
Select
/
Used to select the titles or entries (without titles) from the directory.
VCR, CAM (camcorder)*, TV Device buttons let you set the remote to control one of the three
devices.
CHANNEL Top button switches to the next higher channel, bottom button switches to the next
lower channel. For these to operate, you must have preset your channels.
* Refer to the camcorder's instruction manual for its operation.
When the Remote Doesn't Work Right
Check out these possibilities:
Low Battery
If the remote is not working even at close range, try putting in two fresh AA batteries.
n When replacing the batteries, remove the old batteries and press the POWER button on the
remote and hold it for about 10 seconds, then insert two fresh batteries.
Objects in the Way
There may be objects between the remote and the VCR – for instance, a stack of books on the
coffee table, your 2-year-old child, the dog. Hold the remote so that it points at the VCR with
nothing in the way.
If You Just Want to Watch TV
For normal TV viewing, you do not need to disconnect the VCR. When the TV and VCR are
already on, press POWER on the remote control. The VCR will shut off, but the TV will stay
on.
14

Advertisement

Table of Contents
loading

Table of Contents