Hitachi VT-FX616A Owner's Manual page 35

• Try entering all code numbers (00 - 61). Press CLEAR on remote to change incorrect
entries.
If none of the codes work, press MENU several times to quit. The VCR will not control
your cable box. However, the output channel of the cable box has been set. Turn on the
cable box and leave it tuned to the channel you want to record some time before the
recording is to begin.
Using the VCR Plus+ System to Record a Program
Now that your channels are set up, you can take advantage of this quick and easy method of
delayed recording. You will use the on-screen Easy Guide System, following the basic procedure
for delayed recording outlined on page 40. See the section on Recording a Program for recording
tips and programming priorities.
You set up the delayed recording using the on-screen Easy Guide System.
1. Press MENU, then press 1 to select VCR PLUS RECORDING and bring up this screen:
2. Use the number buttons to enter the PlusCode of the program you want to record. This code
can be up to eight digits. If you enter a wrong digit, press CLEAR and enter the correct one.
3. If you accidentally enter a nonexistent PlusCode number, the VCR gives you an error message
that disappears from the screen in about 10 seconds.
4. If you have entered the correct PlusCode number, press MENU to store the PlusCode in the
VCR's memory. This brings up another screen:
35