Table of Contents
Advertisement
can rec-
are
button,
Mechanical
sounds during
the STOP mode.
Cannot store data
memory
on recorded programs
less
in memory.
in
Cannot locate the
beginning of a program
Hitachi Service Hotline
Authorized Hitachi service facilities are available throughout the US. Call the following Hitachi
Service Hotline.
In the continental U.S.A.
DIAL TOLL FREE
7 days a week, 24 hours a day
1-800-HITACHI
(1-800-448-2244)
You must state your zip code when calling
This is the only mention of the G - Link connector (on the back of the VCR) in this manual. We
i
currently have no info on what sort of signal it uses, compatibility, etc.
Is remote control set to
control the TV?
Has a loaded cassette
been stopped more than 5
minutes?
Is the recording time too short?
Is LIBRARY memory full?
Is a tape recorded by another
VCR being used?
ognize. (Not all TV brands
compatible.)
Press the TV device
then press the button corre-
sponding to the TV function
you want.
Nothing is wrong. The tape
protection mechanism is
working. Eject the cassette if
you are done viewing.
Otherwise, no action is
necessary.
Data is not stored in
when the recording time is
than 1 minute and 30 seconds
the SP mode.
Delete unnecessary tape data.
You cannot search for a program
you want to view from the tape
recorded by another VCR.
61
Advertisement
Table of Contents
