Brother MFC-8460N Service Manual page 305

Facsimile equipment
Hide thumbs Also See for MFC-8460N:
Table of Contents

Advertisement

Firmware Switches (WSW01 through WSW53) Continued
WSW No.
WSW38
V.34 transmission settings
WSW39
V.34 transmission speed
WSW40
V.34 modem settings
WSW41
ON-duration of the scanning light source
WSW42
Internet mail settings
WSW43
Function setting 21
WSW44
Speeding up scanning-1
WSW45
Speeding up scanning-2
WSW46
Monitor of power ON/OFF state and parallel port kept at high
WSW47
Switching between high- and full-speed USB
WSW48
USB setup latency
WSW49
End-of-copying beep and print in black
WSW50
SDAA settings
WSW51
Function setting 16
WSW52
Not used
WSW53
Function setting 18
Operating Procedure
(1) Press the [1] and [0] keys in this order in the initial stage of the maintenance mode.
The machine displays the "WSW00" on the LCD and becomes ready to accept a
firmware switch number.
(2) Enter the desired number from the firmware switch numbers (01 through 53).
The following appears on the LCD:
WSWXX = 0 0 0 0 0 0 0 0
(3) Enter a value to be set (0 or 1) using the [0] and [1] keys.
(4) Press the [OK] key. This operation saves the newly entered selector values onto the
EEPROM and readies the machine for accepting a firmware switch number.
(5) Repeat steps (2) through (5) until the modification for the desired firmware switches is
completed.
(6) Press the [Stop/Exit] key to return the machine to the initial stage of the maintenance
mode.
NOTE:
- To cancel this operation and return the machine to the initial stage of the maintenance
mode during the above procedure, press the [Stop/Exit] key.
- If there is a pause of more than one minute after a single-digit number is entered for
double-digit firmware switch numbers, the machine will automatically return to the
initial stage of the maintenance mode.
Details of Firmware Switches
- The details of the firmware switches are described in
accessible selectors of the firmware switches are shaded.
- Machine w/o fax support some selectors of firmware switches. Those selector numbers
are circled.
Selector 1
Selector 8
8-12
Function
Appendix 4
in which the user-
Confidential

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dcp-8060Mfc-8860dnMfc-8870dwDcp-8065dn

Table of Contents