Adf Motor - Brother MFC-8460N Service Manual

5.1.23 ADF Motor

(1) Remove the two screw pan (S/P washer) M3x6, and then remove the ADF motor.
Screw pan (S/P washer)
M3x6
(2) Remove the three cup S M3x8 Taptite screws, and then remove the Motor frame ASSY.
Taptite, cup S M3x8
View A
<Back side>
Assembling Notes
When assembling the Motor frame ASSY, ensure that the gears (indicated with gray)
are placed in the positions as shown in the figure below.
Motor frame ASSY
Motor frame ASSY
Fig. 5-41
Fig. 5-42
S/B solenoid ASSY (For the models with the DX only)
Arm ASSY SB (For the models with the DX only)
Fig. 5-43
5-44
ADF motor
Motor frame ASSY
<View A>
Screw positions
PF solenoid ASSY
(For the models with the DX only)
Confidential