5.1.83 Laser Unit
(1) Remove the Pin of the Air duct from the frame. Slide the Air duct to the direction of the
arrow 1b and remove the Air duct.
(2) Remove the five cup S M3x6 Taptite screws.
(3) Remove the Protective film.
(4) Pull out the flat cable from the Core.
(5) Remove the Laser unit.
NOTE:
- Be careful not to lose the Protective film attached on the flat cable.
- Do not touch the Laser scanner window directly.
Taptite, cup S M3x6
Assembling Notes
Before assembling the Laser unit, always assemble the Core.
Pin
1a
Hook
Air duct
Fig. 5-156
Laser unit
Fig. 5-157
5-103
Laser unit
Hook
1b
Pin
Pin
<Back side>
Taptite, cup S M3x6
<Front side>
Core
Protective film
Confidential