Operating Prontopro Ng With The Cursor - Philips TSU7000 User Manual

Using the Power Features
-or-
3 In the 'Repeat Settings' screen, tap
The 'Editing Timer' screen appears again. Feedback about the repeat settings
is provided below the
Operating ProntoPro NG
with the Cursor
The cursor is set by default to operate the devices, e.g. to navigate through an on-
screen TV menu. The cursor contains 4 cursor keys: Right, Left, Up and Down. Each
cursor key contains an action list. This list depends on the device that is being
operated.
Toggle button
The cursor can also be used to navigate through devices and pages on ProntoPro
NG's touch screen.
When you enable the cursor navigation in the Settings Pages, the touch
screen navigation with the Left Device and Right Device buttons at the top area
of the touch screen disappears and the cursor navigation icon
the top left corner. You use the cursor for navigating, and not for operating your
devices, until you disable the cursor navigation again.
User Guide
48
To change the setting to 'No', tap the button again.
The timer will not be repeated.
.
button.
Up
Left Down Right
OK
Home button
appears in