Setting The Brightness Of The Backlight; Setting The Timeout Of The Lcd Screen - Philips TSU7500 User Manual

1 Tap and hold the ProntoPro NG icon
touch screen for 3 seconds. The Tools Menu appears.
2 Select
The first Settings Page appears.

Setting the Brightness of the Backlight

You can adjust the intensity of the LCD backlight. There are 4 levels of backlight
brightness.
1 Tap the
The Brightness button is selected. The '+' and '-' labels appear on the two
middle firm keys below the touch screen.
2 To increase the brightness, press (and hold) the firm key labeled '+'.
-or-
To decrease the brightness, press (and hold) the firm key labeled '-'.
3 Tap the
The new Backlight Brightness is set.

Setting the Timeout of the LCD Screen

The timeout of the LCD screen determines how long the LCD touch screen stays
active before turning off. Shortening the active time will increase ProntoPro NG's
battery life.
Note
1 Tap
The LCD Timeout button is selected. The '+' and '-' labels appear on the two
middle firm keys below the touch screen.
2 To increase the timeout, press (and hold) the firm key labeled '+'.
-or-
To decrease the timeout, press (and hold) the firm key labeled '-'.
3 Tap
The new LCD screen timeout is set.
User Guide
33
Customizing ProntoPro NG
.
The LCD screen will only time out when you are not using ProntoPro NG.
in the upper left corner of the
button in the first Settings Page.
button again.
in the first Settings Page.
again.