ZyXEL Communications Omni 56K Smart User Manual page 52

Omni 56K Smart User's Guide
COMMAND
+FIS=vr,br,wd,ln,df,ec,bf,
st
+FCS=vr,br,wd,ln,df,ec,b
f,st
+FLI="string"
+FPI="string"
+FLP=n
+FSP=n
+FNR=rpr,tpr,idr,nsr
5-18
Table 5-11 Service Class 2.0 Commands
DESCRIPTION
Data Compression Format
Error Correction
Binary File Transfer
Minimum Scan Time/Line
The current session's negotiating
parameters
The current session's parameters
Local Facsimile station ID String,
TSI/CSI
Local Facsimile station ID String, CIG
Indicates a document is available for
polling
Enable/Disable polling
Enable Negotiation Reporting
VALUE
df=0:1-Ddf=1:2-D
ec=0:Disable
bf=0:Disable
st=0:0 msst=1:5 msst=2:10 ms
(normal); 5 ms (fine)st=3:10
msst=4:20 ms (normal); 10 ms
(fine)st=5:20 msst=6:40 ms
(normal);20 ms (fine)st=7:40 ms
The same as above
The same as above
n=0:No documentn=1:A document is
available
n=0:Disablen=1:Enable
rpr= 0:Receiver parameters are not
reported.
rpr=1:Receiver parameters are
reported.
tpr= 0:Transmitter parameters are not
reported.
tpr=1:Transmitter parameters are
reported.
idr= 0: ID Strings are not reported.
idr=1: ID Strings are reported.
nsr= 0:Non-standard frames are not
reported.
nsr= 1:Non-standard frames are
Command Sets