ZyXEL Communications Omni 56K Smart User Manual page 43

COMMAND OPTIONS
*C0 *
*C1
*C2
*C3
*Dn n=0-3
*D0 *
*En
*E0 *
*E1
*Pn n=0-15*P9 *
*Qn
*Q0
*Q1
*Q2 *
*Q3
*T
Command Sets
Table 5-4 Extended AT* Command Sets
FUNCTION & DESCRIPTION
10-bit character length
11-bit character length
9-bit character length
8-bit character length
Set the default dial pointer at telephone directory
location 'n.'
(See also S35.4 and S38.0)
Modem error control negotiation.
If error control negotiation fails, keep the non-error
control connection.
If error control negotiation fails, disconnect the call
(hang-up).
Set transmission power level; ranges from -8 dBm
to -15 dBm. (Default: -11 dBm)
Action taken when line quality changes.
The modem will not act on poor signal quality.
Retrain action taken if signal quality is poor. (See
also S41.2)
Adaptive rate, automatic fall-back or forward.
Disconnect if the signal quality is poor.
Recall the last CND (Caller ID) information.
Omni 56K Smart User's Guide
REF.
S29
S21.0
S17.1-4
S27.6-7
S40.2
5-9