ZyXEL Communications Omni 56K Smart User Manual page 48

Omni 56K Smart User's Guide
Table 5-9 Service Class 2 Commands Supported Commands (per TIA PN2388 8/20/90)
COMMAND
f,st
+FDR
+FDT=df,vr,wd, ln
+FET=n
+FK
+FLID="string"
+FLO=n
+FLPL=n
+FMDL?
+FMFR?
+FMINSP=n
5-14
DESCRIPTION
command.
This initiates document reception after receiving a phase C data
command.
Transmits a phase C data command: release the DCE to proceed
with negotiation.
End of page or document command:
More pages; same document.
End of document; another document follows.
No more pages or documents.
Procedure interrupt; another page follows.
Procedure interrupt; end of document, another document follows.
Procedure interrupt; end of document.
Regular fax abort command.
Local ID string parameter.
Flow control options.
No flow control.
Set the XON/XOFF software flow control.
Set the CTS/RTS hardware flow control.
This command indicates the availability of documents for polling.
The DTE has no document available for polling.
Indicates that a document is available for polling.
Request the DCE model.
Request the DCE manufacturer.
Minimum phase C speed parameter.
2400 bps.
4800 bps.
7200 bps.
VALUE
n=0
n=1
n=2
n=4
n=5
n=6
n=0
n=1
n=2
n=0
n=1
n=0
n=1
n=2
Command Sets