S-Register Descriptions; Basic S-Registers "Atsn=X; Table 5-12 Basic S-Registers "Atsn=X - ZyXEL Communications Omni 56K Smart User Manual

Omni 56K Smart User's Guide
COMMAND
+FRQ=pql,cbl
+FAA=n
+FCT=n
+FMS=n
+FBS?
5.3

S-Register Descriptions

In most bit-mapped S-registers, the default bit value is 0. An asterisk follows non-0 default values. In some
cases, default values are shown in the reference column preceded by +. Some bits are reserved for factory use
and should not be changed.

5.3.1 Basic S-Registers "ATSn=x"

COMMAND
5-20
Table 5-11 Service Class 2.0 Commands
DESCRIPTION
Receive Quality Thresholds
Adaptive Answer Mode
Phase C Timeout
Minimum Phase C Speed
Buffer Size

Table 5-12 Basic S-Registers "ATSn=x"

FUNCTION & DESCRIPTION
VALUE
disabled.
tq=1:Transmit copy quality check is
enabled.
pgl= 0-64h:Specifies the percentage
of good lines
cbl= 0-ffh:Specifies the maximum
tolerable number of consecutive bad
lines.
n=0:Answers as set by +FCLASS
n=1:Answers and automatically
determines the call type.
n=0-ffh,1 sec units
n=0:2400 bps
n=1:4800 bps
n=2:7200 bps
n=3:9600 bps
n=4:12000 bps
n=5:14400 bps
512,256
REF.
Command Sets