Omni 56K Smart User's Guide
COMMAND
OPTIONS
&T0
&T1
&T8
&Vn
&V0
&Vn
&V3
&Wn
n=0-1
&Yn
&Y0
&Y1 *
&Y2
&Z?
&Zn=s
n=0-3
5.1.3 Extended AT* Command Sets
COMMAND
OPTIONS
*Cn
5-8
Table 5-3 Extended AT& Command Sets
FUNCTION & DESCRIPTION
Terminate the test in progress.
Initiate an Analog Loop-back (ALB) test.
Initiate an Analog Loop-back test with self-test.
(ALB+ST)
View the profile settings.
View the current active settings.
View the (n-1) user profile settings (n=1-2)
View the factory default settings.
Save the current settings to user profile n in
nonvolatile RAM. (See also S35.6)
Break handling. Destructive Break clears the
buffer. Expedited Break is sent immediately to the
remote system.
Destructive, expedited.
Nondestructive, expedited.
Nondestructive, unexpedited.
Display all the phone numbers stored in nonvolatile
RAM.
Store phone number/s to NVRAM at location n
(n=0-3) use AT*Dn or ATS29=n to set the default
dial pointer.
Table 5-4 Extended AT* Command Sets
FUNCTION & DESCRIPTION
Character length, including start, stop and parity
bit.
REF.
S28.2-3
REF.
S15.3-4
Command Sets