Extended At# Command Sets; Fax Command Sets; Service Class 1 Commands; Table 5-5 Extended At# Command Sets - ZyXEL Communications Omni 56K Smart User Manual

Omni 56K Smart User's Guide

5.1.4 Extended AT# Command Sets

COMMAND OPTIONS
#En
#E0
#E1
5.2

Fax command sets

5.2.1 Service Class 1 Commands

COMMAND
+FCLASS=n Service Class Identification and Control
+FTS=n Stops data transmission and pauses
+FRS=n Wait for Silence
+FTM=<MOD> Transmit Data with <MOD> Carrier
+FRM=<MOD> Receive Data with <MOD> Carrier
+FTH=n Transmit HDLC Data with <MOD>=3 Carrier
+FRH=n Receive HDLC Data with <MOD>=3 Carrier
The value of <MOD> parameters lists as shown next:
5-10

Table 5-5 Extended AT# Command Sets

FUNCTION & DESCRIPTION
Modem status in escape state
This disables the reporting of modem status when it is in
escape state
This enables the reporting of modem status when in escape
state

Table 5-6 Service Class 1 Commands

DESCRIPTION
REF.
VALUE
n=0:Sets to modem mode
n=1:Sets to Class 1 mode
n=2.0:Sets to Class 2.0 mode
n=0-255 in 10 ms units.
n=0-255 in 10 ms units.
See Table 5-6
See Table 5-6
n=3
n=3
Command Sets