Digital Control Panel - Westerbeke 7.6 kw EDT Operator's Manual

DIGITAL CONTROL PANEL
DESCRIPTION
WESTERBEKE'jS, Digital Control Panel provides the
operator with an LCD display that contunuously monitors
all the operations of the generator in easy to understand
text messages.
CONTROL BOX
Note that the design and size of the control box will vary
depending on tl,e model generator.
SA FUSE
PROTECTS THE CONTROL PANEL
ELECTRONICS FROM A HIGH
AMPERAGE OVERLOAD.
INDICATOR LIGHTS
SIX LIGHTS THAT INDICATE
c' WHERE A FAULT HAS OCCURED.
20A BREAKER
SW~":
SHUT-OFF WHEN PERFORMING
MAINTENANCE OR WHEN
REPAIRING A FAULT RESET TO
RESTART THE ENGINE.
FAILURE LIGHT
A RED LIGHT WILL APPEAR IF
THE RUN SEQUENCE IS
INTERUPTED BY A FAILURE. '
~",~¢')"
'
/
LCD DISPLAY
Operating temperatures may cause the LCD display to vary
in color. This is normal and a change in color will not affect
the operation on the control panel.
Periodically clean the cQntrol panel LCD screen using a soft
cloth.
. UPAND DOWN ARROWS
WHEN THE LCD DISPLAY IS
IN ITS SCROLL MODE. THE
UP AND DOWN ARROWS CAN
BE USED TO ADJUST THE
, DARK AND LIGHT CONTRAST
UP..JlRROW
WHEN IN SCROLL LOCK MODE
INDIVIDUAL FUNCTIONS CAN
BE MONITORED BY PRESSING,
THE UP-ARROW.
SCROLL LOCK
STOPS RUN SEQUENCESO •.
THAT A SINGLEFUNCTlOii CAN
BE MONITORED
DOWN-ARROW
. WHEN IN SCROLL LOCK MODE
INDIVIDUAL FUNCTIONS CAN
BE MONITORED BY PRESSING
THE OOWN-ARROW.
PRIME BUTTON
THISHUTTON ENERGIZES THE FUEL
PUMP. AFTER REPAIRING A FAILURE
OR PERFORMING MAINTENANCE,
PRESSING THIS BUTTON WILL PURGE
AIR OUT AND BRING FUEL IN TO THE
LINES.
MANUAL ENGINE SltUT·OFF"k
LCD DISPLAY SEQUENCE . .
IS SHOWN ON THE FOLLOWING PAGE . .
Should the stop button on the panel fail in its nonnal
function to stop the engine. The engine is equipped with
a manual shut-off lever located on the engine block just
the side oil fill, Simply move the lever to the left aud hold
it there until the engine comes to a complete stop.
Engines & Generators
7'