Westerbeke 7.6 kw EDT Operator's Manual page 6

INSTALLATION
When installing WESTERBEKE engines and generators it is important that strict
attention be paid
to
the following information:
CODES AND REGULATIONS
Strict federal regulations, ABYC gnidelines, and safety codes must be complied with
when installing engines and generators in' a marine environment.
SIPHON·BREAK
For installations where the exhaust manifold/water injected exhaust elbow is close to
or will be below the vessel's waterline, provisions must be made to install a siphon-
break in the raw water supply hose to the exhaust elbow. Tbis hose must be looped a
ntinirnum of 20" above the vessel's waterline. Failure to use a siphon-break when
the exhaust manifold/water injected exhaust elbow is near or below the loaded
water line of the vessel will result in raw water damage to the engine and possible
, flooding of the vesseL
If you have any doubt about the position of the water-injected exhaust elbow relative
to the vessel's waterline under the vessel's various operaling conditions, install a
siphon-break. '
NOTE: A siphon-break requires periodic inspection and cleaning to ensure proper
operation. Failure to properly maintain a siphon-break can result in catastrophic
engine damage. Consult the siphon-break manufacturer for proper maintenance.
EXHAUST SYSTEM
The exhaust hose must be certified for marine use.
Th~
system must be designed to
prevent water from entering the exhaust under any sea conditions
and
at any angle
A detailed40 page Marine Installation Manual covering gasoline and
diesel engines and generators is provided with each unit sold. Additional
copies can be obtain off our website in pdf form. www.westerbeke.com
Engines
&
Generators
iv
"
AVAILABLE FROM
YOUR WESTERBEKE
OEALER