Dc Auxilliary Power Adapter; Remote Panel Wiring - Westerbeke 6.5 MCG Service Manual

DC AUXILLIARY POWER ADAPTER
DESCRIPTION
This auxilliary power adapter is designed to plug-in the
engine wiring harness where the electric fuel pump is
connected. Simply tum off the DC power using the breaker
on the control panel. Unplug the electric fuel pump, connect
the adapter and connect the fuel pump to one of the adapter
plugs. Cut off the other plug and strip back the wires and
maintaining polarity (violet+ and black-), connect to the
NOTE: This auxiliary connection provides DC power ONLY
when the engine is running or when priming the fuel system.
The maximum DC amperage available from this circuit is
400
MILLIAMPS.
relay that will be supplying DC power to the auxilliary
;~~.:--~-----···-----------------·-----
component. Re-set the DC powe:t; breaker on the control //"
panel. ..
~"-
-""',-"
...
-
...
-
~~-r---;~--~-~-~-~--~-
ADAPTER PN. 052274
--~
REMOTE PANELS WIRING
·.REMOTE
CONN~CTOR
.2
(EO
OUT • RUN INOI<;ATOR
1 START
SWitCH OUT'PUT PNK· 18GA
WHT/6LKIGRN·I8GA
WHT flli;K I YEl· 20GA
WHT/BLK/GRY·20GA
· LEO Ot,IT • COOLANT TE.MP WHT
/BLK/ORG·20GA·
e LEO OUT • LOW 0 It PRESS .WI:IT IBLK FBL U •
20GA
REMOTE
CONNECTOR
PNK-·l8GA
WHT /BLK /GRN··I8GA
83
STOP/START PANEL
WITH FAULT DISPLAY
STOP/START PANEL
ROCKER SWITCH ONLY
l
EXTENSION HARNESS'
15' PN. 054931
30'PN.054932