Spare Parts - Westerbeke BCD 4.4KW Operator's Manual

SPARE PARTS
Since a possibility exists in which the engine may need to be serviced at sea or while in a port other than
your home port, certain spare parts should be kept on board to help minimize delays in your voyage. Please
refer to your engine's Parts List for part numbers when ordering spare parts. Listed below are those spare
parts that should be carried on board at all times.
1. An Impeller Kit
2. A Fuel System hardware Kit
3. An Electric Fuel Lift Pump Filter and a Secondary Fuel Filter.
4. An Alternator/Sea Water Pump Belt
5. Hose Clamps
6. A Spare Oil Filter with a Spare Quart of Diesel Service Engine Oil along with a Gallon of Premixed An-
tifreeze.
7. A few Zinc Anodes and Heat Exchanger End Plate Gaskets
8. An Oil Pressure Switch
Other parts, whose life expectancy cannot be accurately predetermined, should be carried on board (in ad-
dition to those listed above) especially if the vessel is to be taken on long ocean voyages. These parts are
listed below.
1. Fuel Injectors
2. Glow Plugs
3. Cooling System Hoses
4. A Starter
5. A 20 Amp DC Circuit Breaker
6. An Electric Fuel Lift Pump
7. A Sea Water Pump
8. Battery Terminal Connectors
9. A Fuel Run Solenoid
The spare parts listed directly above are those we recommend be carried on board during long ocean
voyages. You may wish to ask other boat owners who have similar crafts and who have completed long
ocean voyages as to what spare parts they carried on board and what parts were needed at specific times
of the voyage. From the list provided directly above and from these inquiries, you can determine what spare
parts may be needed. In addition, if you are planning a long ocean voyage, consult your local Westerbeke
dealer for a listing of the Westerbeke dealers located on your route.
81
Westerbeke Generators