Westerbeke 7.0KW BCG-60HERTZ Operator's Manual page 32

Optional Remote Instrument and Remote Start Panels
An optional remote instrument panel is available, which includes starting controls. This panel also includes
a water tem perature gauge, oil pressure gauge,
battery
voltmeter, operating hourmeter and start-stop control
switches.
REMOTE START PANEL
REMOTE I NSTRUMENT PANEL
The remote instrument panel has with it two sending units to be installed on the engine block. One, a water
temperature sender and the other, an oil pressure sender. Plugged ports for each are located on the engine.
The water temperature sender is installed in the thermostat housing and the oil pressure sender is installed
adjacent to the oil pressure switch. Use sealing compound on the threads of both senders when installing.
Electrical connections for each sender are tied off adjacent to each sender's location.
NOTE: The blue colored connection is for the oil pressure sender and the tan colored
connection
is
for the water temperature sender.
IWARNINGI
When installing the optional remote start panel or the optional remote instrument panel, it is
the installer's responsibility to comply with U.S. Coast Guard Standards 33 CFR PART 183.
An optional remote start panel is available for controlling the generator from a remote location.
Remote start panels include a green LED which lights when the engine runs at approximately 600 rpm. The
purpose ofthe LED is to alert the operator to release the starter toggle switch in addition to continue indicating
that the generator set is running.
Westerbeke Generators
26