Westerbeke 7.0KW BCG-60HERTZ Operator's Manual page 16

7.0 KW BCG & BCGA SYSTEM SPECIFICATIONS
Raw Water Flow. at 1800 rpm
(measured before discharging
into exhaust elbow)
System Capacity (fresh water)
LUBRICATION SYSTEM
General
Oil Filter
Sump capacity (not including filter)
Operating Oil Pressure (engine hot)
Oil Grade
ELECTRICAL SYSTEM
Starting Battery
Battery Capacity
DC Battery Charger
Starter
DC No-Load Current
DC Cranking Current
Westerbeke Generators
3.75 -4.0 U.S. gpm (14.19 -15.14Ipm)
4.2 U.S. qts (3.9 liters)
Fully - Force fed type by Trochoid pump,
crankshaft --driven.
Full flow, paper element, spin-on type.
P.N.036918
3.0 qts (2.8 liters)
50·70 psi (3.5 - 4.9 kg/cm
2
)
API specification of SE, SF or SG.
12-volt. 24 A-H, (-) negative ground
(recommended) (28 A-H in cold areas).
24 - 28 (ampere-hours)
Integral controller 13-volt. 10 amp
(located in the AC alternator).
12-volt, 1.2 t<NV, Magneto engaging type.
90 amp (max) at 11.5 volts.
100 -125 amps (engine cold).
10