Table of Contents
Advertisement
Distributor Disassembly
1.
Remove wires from distributor noting their position for replace-
ment.
2.
Remove distr ibutor from engine.
3.
Remove cap.
4.
Remove rotor.
5.
Remove governor assembly.
6.
Remove pickup coil and igniter.
Distributor Assembly
1.
Assemble in the reverse order of disassembly.
2.
Apply engine oil sparingly to the o-ring on the distributor shaft.
3.
Insert the distr ibutor shaft by turning it, ensur ing that the
distributor shaft fits into the groove on the rear of the camshaft
which is offset to provide proper timing.
4.
Adjust engine timing according to the specifications in the Engine
Technical Data Section.
82
Hide quick links:
Advertisement
Table of Contents
