Westerbeke 7.6 KW BTD 60Hz Operator's Manual page 58

Generator Frequency
Frequency is a direct result of engine/generator speed:
1800 RPM - 60 Hertz
1500 RPM - 50 Hertz
To change the generator's frequency, refer to the "MAINTENANCE AND ADmSTMENTS" section of
this manual.
Load Connections
The generator's data plate gives the voltage, current and frequency rating of the generator. An AC wiring
decal is affixed to the inside of the louvered cover on the generator end. A diagram of the various AC
voltage connections is provided on the decal. The information on the decal is similar to the figure shown
on the following page.
The generator is a single-phase, reconnectable 120 volts AC two-wire or 1201240 volts AC three-wire, at
60 Hertz; or 110 volts AC two-wire, 1101220 volts AC three-wire, or 220 volts AC two-wire, at 50 Hertz.
Refer to the "SYSTEM SPECIFICATIONS" section of this manual for ratings, located at the beginning of
this manual.
WESTERBEKE GENERATORS
54