Westerbeke 7.6 KW BTD 60Hz Operator's Manual page 19

Generator Mounting - Location
The complete generator unit is mounted on lightweight rails by means of four flexible isolator mounts that
help prevent the transfer of vibration from the generator to the rails. Each generator mounting rail has
several 112 inch bolt holes so bolts can be employed to properly secure the generator to its mounting
platform.
The mounting location must be dry, above low-lying vapor areas, and in an area where bilge water and
water from above cannot splash or drip on the generator or drive engine. The drive engine and generator
must be accessible for minor servicing and repairs. Access for major repairs should be given
consideration as well. The generator set must be properly ventilated to provide fresh cooling air for the
generator end, for engine combustion needs, and to remove heat produced by the engine while operating.
The generator set needs fresh cool air in whatever location in the vessel it is installed. Hot generator
discharge air
!!lli§!.
be removed from the generator area. The platform on which the generator and its
mounting rails are located must be strong enough to support the generator during all angles of vessel
operation.
15 WESTERBEKE GENERATORS