24 PRE-OPERATING PREPARATIONS
4. Warning system
If outboard motor encounters an
1
abnor mal condition of fault, the
warning horn will emit a continuous
beep or intermittent short beeps
2
and the warning lamp (LED) will
synchronize with the horn and engine
speed will be limited (engine will not
3
be stopped).
See next page for conditions which
4
will lead to an abnormal condition or
fault.
5
6
7
8
9
10
11
12
13
14
Location of warning horn and lamp
■ Warning horn
Located inside the remote control
for EP models. Located in the top
cowl for other models.
■ Warning lamp (LED)
Located on the front of bottom
cowl.
Note
Warning lamp for optional tachometer
will synchronize with the LED.
Warning lamp