TOHATSU MFS 25B Owner's Manual page 52

Hide thumbs Also See for MFS 25B:
Table of Contents

Advertisement

52
INSPECTION AND MAINTENANCE
Replacing the anode
A sacrificial anode protects the
o u t b o a r d m o t o r f r o m g a l v a n i c
1
corrosion. Anode is located on the gear
case and the cylinder. When the anode
is eroded more than 2/3, replace it.
2
Notes
3
● Never grease or paint the anode.
● At each inspection re-tighten the
anode attaching bolt. As it is likely
to be subjected to electrolytic
4
corrosion.
5
Anode
6
(Trim tab)
7
8
9
10
11
12
13
Anode
(installed on the back of cap)
14
Anode
Anode
Checking and Refilling Oil in the
Power Trim & Tilt.
① Check the oil level of the reservoir
tank as shown on the right while
the tank is kept in a ver tical
position. Tilt the outboard motor up
to check the oil level in the tank.
Remove the oil cap by turning
counter-clockwise, then check if
the oil level reaches the bottom
line of the plug hole.
Oil cap
WARNING
!
● Be sure that outboard motor is
secured to transom or service
stand, or accidental drop or fall of
outboard motor could lead to severe
personal injury.
● Be sure to lock outboard motor if
it is tilted up, or accidental fall of
outboard motor could lead to severe
personal injury.
● Do not go under outboard motor
tilted up and locked, or accidental
fall of outboard motor could lead to
severe personal injury.
Oil level

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfs 3.5b

Table of Contents