Changing preset parameters
Step 1
Press the EDIT button to enter the "EDIT MODE"
Step 2
Turn the FUNCTION SELECT control to select the function heading which contains the
parameter(s) you wish to change.
Turn the PARAMETER SELECT control to the specific parameter you wish to change.
Step 3
Turn the PARAMETER ADJUST control to alter the parameter value. The LED above the
Step 4
STORE button will light, indicating that the preset has had a parameter altered from its stored
value.
Storing changed preset parameters
While viewing a function or parameter title, press the STORE button to store the altered
Step 5
parameter(s). "STORED" will flash briefly on the display.
EDIT MODE
****
REVERB
****
REV DECAY
59
REV DECAY
STORED
Operating the Blue Thunder
32
™
32