Table of Contents
Advertisement
English
The HDD: General menu allows you to initialize the hard
drive(s) in the DVR. Don't initialize a drive that already has data
on it, as the initialization process will erase any information
on the drive. You also have the option of adding a Network-
attached storage device (NAS) that you can record to.
Add: Create a folder on your NAS device, then input the IP
address of your NAS device and the folder name that you
created earlier.
The HDD: Advanced menu allows you to configure a quota
on the HDD for each camera that is connected to the DVR.
Each camera can be allocated a certain amount of space that
is available on the HDD. If you have multiple HDDs installed,
you can also instruct the DVR on which HDD each camera can
record to.
HDD: General
HDD: Advanced / HDD Detect
Init: Initializes the HDD so that it's ready to accept data.
To find out which NAS devices are compatible with our DVR,
please visit our website
www.swann.com
Technical Support Telephone Helpdesk.
The HDD: Detect menu will display technical specifications
of the hard drive(s) installed. If you're looking at this screen,
you've probably been directed to do so by Swann Technical
Support.
or contact Swann
55
Advertisement
Table of Contents
