Uniden TRAX350 Owner's Manual page 87

Distance Shows the distance you need
Remaining to travel on the route before
reaching your final destination.
Time Shows the time needed to reach
Remaining the final destination of the route
based on information available
for the remaining segments of
the route. The calculation cannot
take into account traffic jams
and other possible delays.
Arrival Time Shows the estimated arrival
time at the final destination of
the route based on information
available for the remaining
segments of the route. The
calculation cannot take into
account traffic jams and other
possible delays.
GPS Time Shows the current time
corrected with time zone offset.
The accurate time comes from
the GPS satellites, and the time
zone information comes from the
map or it can be set manually in
Regional settings.
Altitude Shows the elevation if it is
provided by the GPS receiver.
Speed Limit Shows the speed limit of the
current street if the map contains
it.
How Do I Use It?
Tap this field to show
it on the map screen
in one of the Trip Data
fields.
Tap this field to show
it on the map screen
in one of the Trip Data
fields.
Tap this field to show
it on the map screen
in one of the Trip Data
fields.
Tap this field to show
it on the map screen
in one of the Trip Data
fields.
Tap this field to show
it on the map screen
in one of the Trip Data
fields.
Tap this field to show
it on the map screen
in one of the Trip Data
fields.
Opens a new screen
with three resettable
Trip Computers.
Page 87