Gps Settings; You Can Set Up The Connection To The Gps - Uniden TRAX350 Owner's Manual

How Do I Use It?
Speed
Camera
Warning
Warn if Too
Fast for
Pedestrian
Safety Mode

GPS settings

You can set up the connection to the GPS receiver. Tap the following
buttons: ,
Type
GPS Enabled
Port
Baud Rate
Page 110
This feature allows you to receive a warning when
approaching a Road Safety Camera. You must ensure
on your own liability that using this feature is legal in
the country where you intend to use it. You have the
following options:
• Audible Warning: beeps can be played while you are
approaching the camera, or just alert sounds if you
exceed the speed limit while approaching one of these
cameras.
• Visible Warning: the type of the camera and the
controlled speed limit appears on the Map screen while
you are approaching one of these cameras.
Enable this warning to be alert if pedestrian mode is
activated and you drive fast. You are asked if you want
to change to car navigation mode. This way you can
be sure you will not be routed via one-way roads in the
wrong direction as a pedestrian could, for example.
Safety Mode disables the touch screen above 10 km/h
(6 mph) to keep your attention on the road. While driving,
you will not be able to set a new destination or to change
settings. The only screen control that remains enabled is
the gesture that puts you back on the Map screen.
,
Description
Turn the connection to the GPS receiver on or off.
Turning off the GPS receiver can be useful for indoors
use or demonstration purposes.
The communication port used between the GPS
receiver and the application.
The communication speed used between the GPS
receiver and the application.
.