Sound Settings; You Can Adjust The Sounds Of Trax350 - Uniden TRAX350 Owner's Manual

Colour Profiles TRAX350 is able to show the map and the menus in
different colours during the day and during the night.
Select the colour profiles to be used in each mode,
and select the automatic or manual switching between
the daytime and night colour profiles.
Elevation on 2D 2D maps can also display 3D information. These
Map top-down maps can display elevation by colours and
shading.
Show Street Street names and POI icons can be disturbing on
Names the map during navigation. With this switch you can
suppress these map elements when TRAX350 is
following your position on the map. If you move the
map, both the street names and POI icons reappear
immediately.
Lane Some maps contain lane information to help you
Information position your car in the upcoming intersection.
This setting tells TRAX350 whether to display this
information at the top or at the bottom of the map.

Sound settings

You can adjust the sounds of TRAX350. Tap the following buttons:
.
Button Description
Master Volume Use the switch to mute all sounds of the device and
then to re-enable them again. The position of the fader
determines the volume level.
Voice Guidance The slider adjusts the loudness of voice prompts. In its
Volume leftmost position, the voice guidance is suppressed; in
its rightmost position, the master volume applies.
Key Sounds Key sounds are audible confirmation of either pressing
hardware buttons or tapping the touch screen.
The switch turns the key sounds on or off. Key sounds
are played at the master volume level.
.
How Do I Use It?
,
Page 103