Table of Contents
Advertisement
4)
Hold the disk
exactly above the spot where you want to glue it down.
(Remember, the glue is designed to be permanent!)
5)
Press the disk firmly against the surface. Push down along the
edges, too, so that every part of the disk makes good contact with the
surface.
6)
Before you install the windshield mount, gently tug on the disk to make
sure it's secure.
7) Remove the clear plastic sheet
from the top of the anchor disk.
8)
Press the suction cup flat against the
anchor disk, then push the suction latch
down (towards the suction cup) to lock
it into place.
Flip the latch
down towards
the suction cup
How Do I Put It in My Car?
Page 13
Advertisement
Table of Contents
