Using The Cursor (The Selected Map Location) - Uniden TRAX350 Owner's Manual

How Do I Use It?
Icon Status for
GPS position
quality
Battery status
The battery is
being charged
Vehicle type

Using the Cursor (the selected map location)

First, place the Cursor at the desired map location with one of the following
options:
• Use the Find menu to select a location. The map returns with
the selected point (the Cursor) in the middle, and the Cursor
menu appears with the available options.
• Tap the screen and tap again to place the Cursor at the desired
location. Now tap
You can perform the following actions:
Button
Page 32
More Information
The more lit bars, the better is the GPS
position.
The device is running on battery power.
The number of lit bars represent the
remaining capacity.
The device is running on external power.
The battery is being charged.
The symbol displays the vehicle type
used for route calculation.
to open the Cursor menu.
Action
In the active route, uses the Cursor as the start point
by replacing the current GPS position (available in
Advanced mode only)
In the active route, uses the Cursor as the destination
by replacing the previous destination
In the active route, uses the Cursor as a via point (an
intermediate destination) preceding the destination
(available in Advanced mode only)