Selecting An Intersection As The Destination - Uniden TRAX350 Owner's Manual

How Do I Use It?
3. Tap
6. A list appears with the matching addresses. Tap the desired
one.
7. The map appears with the selected point in the middle. Tap
(Advanced mode) from the Cursor menu. The route is then
automatically calculated, and you can start navigating.

Selecting an intersection as the destination

The procedure is explained starting from the Navigation menu.
1. Tap the following buttons:
,
2. By default, TRAX350 proposes the country/state and settlement
where you are. If needed, tap the button with the name of the
country/state, and select a different one from the list.
3. If needed, change the settlement:
• To select the settlement from the list of recently used ones,
tap the
• To enter a new settlement:
1. Tap the button with the name of the settlement, or if you
have changed the country/state, tap
2. Start entering the settlement name on the keyboard.
3. Get to the list of search results:
• After entering a couple of characters, the names that
match the string appear in a list.
• Tap
Page 52
to finish entering the address.
(Simple mode) or
(Advanced mode).
button.
to open the list of results before it
(Simple mode), or
.